| cooley |
| |
| Cooley Sign & Awning Products |
| Cooley manufactures and markets a full spectrum of products including reinforced polymer membranes, banner and billboard materials,
decorating products and many more related products for the sign making, outdoor advertising, and point-of-purchase markets. |
| |
| Eradication of Cooley products is an efficient and economical way of producing high quality decorated sign faces. When Cooley Magic®
eradication solution is applied to Cooley Brite or Coolthane Colley Brite, it creates bold white graphics on solid color backgrounds. This method of sign decoration lets you produce graphics, striping, logos, lettering and more, that would otherwise been very costly projects requiring expensive equipment or labor. Not only is eradication easy, but it can be combined with other decoration techniques such as pressure sensitive vinyl's, screen printing, spray painting, and heat transfer. |
| |
| Follow these three easy steps to eradicate: |
 1. Apply Mask Place a pre-mask* over the pre-cut Coolmask™ stencil of your graphic design.
Apply this in the desired position on the Cooley Brite eradicable product. Make sure that a good adhesive bond has been formed. Smooth out the mask very carefully, removing all the air bubbles, and peel off the pre-mask (peeling back at 180o). Make sure the mask edges of the design adhere tightly to the Cooley Brite. |
| |
 2. Wipe off Color In a well ventilated area, lightly saturate a soft white cloth with Cooley Magic. Carefully wipe the exposed area until all color is removed. |
| |
 3. Remove Mask Gently peel the mask off the Cooley Product. You will see a bold white graphic image, with extremely clear definition and contract designed to last for years to come. |
| |
| * Contact us for the recommended pre-mask, such as TransferRite® or R Tape and others. |
