| enVisionTM375 Plotters |
| |
 |
| |
| Performance Specifications |
| Features: |
Precision Material Drive, Incredible Speed, Automatic Tool Settings, Material Shuffle, Pause, View, and Recovery, Cut, Pounce and Pen Functions, High
Performance Servo-Drive, Firmware Upgrades Easily Downloaded from Your Own PC |
| Applications: |
Cutting GERBER EDGE Output, Text-Intensive Signs, Precision-Cut Intricate Graphics, Highly Repetitive Work, Time-Sensitive Short-Run Graphics |
| Material Width: |
enVision 375: 15" (381 mm) |
| Active Cutting Width: |
enVision 375: 13.25" (337 mm) |
| Maximum Media Thickness: |
.045" (1.1 mm) |
| Drive Technology: |
Sprocket-Feed |
| Cutting Technology: |
Swivel Knife |
| Mechanical Resolution: |
0.0002" (0.005 mm) |
| Knife Options: |
30, 45, 60 degree |
| Maximum On-Axis Speed: |
36 ips (914 mm/second) |
| Maximum Diagonal Speed: |
50 ips (1270 mm/second) |
| Acceleration: |
3G |
| Knife Cycle Speed: |
40 up/down cycles per second |
| Cutting Pressure Range: |
0.0oz. - 16oz.(0g-454g) |
| Interface: |
250 Kilobytes |
| Input Buffer: |
250 Kilobytes |
| Stand: |
Desktop |
| Pounce: |
Optional Tool |
| Dimensions: |
29" L x 11" W x 14" H (740 mm x 280 mm x 360 mm) |
| Weight: |
60lbs (27 kg) |
| Power Requirements: |
100-230 Volts 47/63 Hz. |
| Software Command Set: |
GSP-GL or HP-GL/S subset |
| Vector Look Ahead: |
Yes |
| Curve and Arc Smoothing: |
Yes |
| Test Plot Possibility: |
Yes |
| Test Cut Possibility: |
Yes |
| Replot Function: |
Up to 9,999 |
| Pens: |
HP Compatible |
|
| |
