| odysseyTMXP Plotters |
| |
 |
| |
| The ODYSSEY is renowned for its automatic
material loading, its advanced edge detection
and active material tracking systems to monitor
and correct material drift. These features
deliver longer unattended runs, unparalleled
ease of use and reliability. But there's more...
now we've added "XP"! |
| |
| Email us for information - click
here |
| |
| Performance Specifications |
| Material Width: |
4"-52" (101.6 mm-1321 mm) |
| Active Cutting Width: |
3.25"-49" (76.2 mm - 1244.6 mm) |
| Maximum Media Thickness: |
.045" (1.1 mm) |
| Drive Technology: |
Patented GerberDrive™ System |
| Cutting Technology: |
Swivel Knife |
| Mechanical Resolution of Motor: |
0.0002" (0.005 mm) |
| No. of Pressure Rollers: |
3 |
| Knife Options: |
30, 45, 60 degree |
| Maximum On-Axis Speed: |
36 ips (914 mm/second) |
| Maximum Diagonal Speed |
50 ips (1270 mm/second) |
| Acceleration: |
3G |
| Knife Cycle Speed: |
40 up/down cycles per second |
| Cutting Pressure Range: |
0.0 oz. - 16 oz. (0g-454g) |
| Interface: |
RS-232C |
| Input Buffer: |
3 Megabytes |
| Dual Position Roller Stand: |
Standard |
| Pounce: |
Optional Tool/Pounce Mat |
| Dimensions: |
70"L 12.25"W 49.5"H (unboxed with stand)
(1778mmL 311.1mmW 1257.3mm H) |
| Weight: |
200lbs.(unboxed)(90.8 kilograms) |
| Power Requirements: |
100-230 Volts 47/63 Hz. |
| Software Command Set: |
GSP-GL or HP-GL/S Subset |
| Vector Look Ahead: |
Yes |
| Curve and Arc Smoothing: |
Yes |
| Test Plot Possibility: |
Yes |
| Test Cut Possibility: |
Yes |
| Replot Function: |
Up to 9,999 |
| Pens: |
HP Compatible |
| Note: |
Not endorsed for cutting Rubylith. Some performance variations may occur based on materials used. |
| *Plotter specifications subject to change and may be modified without notice. |
|
| |
