| ImageRIP™ Option for OMEGA ™ |
| |
| ImageRIP™ is Gerber's large format inkjet
Raster Image Processing software. This powerful
RIP software accepts most image format files
(.JPG, .TIF, .BMP, .PCX etc.), Corel™ .CMX
files, and .GAD files from Gerber and
third-party developed software, for printing on
popular, large format inkjet printers, such as
ENCAD®, Graphtec®, Mimaki®, and
Hewlett-Packard®. ImageRIP provides spectacular
color prints and integrates smoothly with the
Composer design application. |
|
Email us for information - click
here - |
|
|
OMEGA ™ RECOMMENDED SYSTEM REQUIREMENTS: |
|
As the computer hardware exceeds the minimum
requirements, response, redraw, and rendering
speed will improve significantly. For example,
we have tested OMEGA™ on systems with 266MHz
Pentium II processors, 128MB RAM and 6GB drives
and found the performance to be very good. |
|
|
Minimum
System Requirements:
(Note: Running OMEGA™ software on minimum system requirements will
be very slow) |
- IBM-PC compatible computer with a Pentium™
90 MHz processor and 32 MB RAM (all OMEGA™ variants).
- Hard disk requirements to install and run
OMEGA™ and its associated Gerber Soft Fonts (outline fonts).
- The OMEGA™ requirements below are in addition
to the Windows recommendation that at least 10% of the total hard
disk space be kept free. Additional hard disk space is needed to
load options such as ART Path™, ImageRIP™, and Gerber ColorID™
options. More free space allows you to work with larger image files
and gives more room to keep previous jobs around for immediate use.
Regular disk backup is highly recommended.
- OMEGA™ CP : 750 MB = 500 MB (plus
250 MB free space for image processing)
URW TrueType™: (Small Text) fonts require
slightly over 156MB of additional disk space if they are
all stored on the hard drive in addition to the Gerber
Soft Fonts provided with OMEGA™ CP. Storing only those used by
OMEGA™ on the hard drive will reduce this requirement. Note that
Windows will slow down significantly with more than 250 TrueType
fonts installed. OMEGA™ will slow down significantly with more
than 500 Gerber Soft Fonts installed.
- OMEGA™ CS & OMEGA™
CL :
260MB = 160 MB plus 100 MB free space for image processing
- CD-ROM Drive
- 3.5" floppy disk drive
- 2 Parallel ports (LPT/printer type ports;
25-pin, female connector) for use with paper printers and the
GERBER EDGE®; additional serial & parallel ports can be added with
the Gerber serial Parallel Board Option P53107D. The GERBER EDGE®
2 requires an ECP parallel port; Gerber offers one we know to be
reliable as part number P71851C
- An Ethernet IEEE 802.3 LAN card (operating
at 10 megabits per second) if you are interfacing to the GERBER
MAXX®
- 2 Serial ports (9-pin, male connector). An
available serial port is required occasionally to connect the
MonacoSENSOR™ colorimeter when color-calibrating a monitor. This
may be accomplished by temporarily disconnecting another serial
device during the calibration
- SVGA monitor (800x600 or higher resolution
with more than 256 colors)
- Microsoft PS/2-style bus mouse (not
a serial mouse. A bus mouse does not use a serial port, leaving
that port available for a plotter)
- Microsoft Windows 95, Windows 98 or
Windows NT Workstation 4.0 with service pack 5
- A USB port and a USB-compatible Operating
System is required only if a USB security block option is
requested
|
|
|
