| Duster 2000 |
| |
Engineered to remove...
- Dust
- Odors
- Smoke
- VOC's
- Mists
- Spray Powder
- Toxic Fumes
- Pollen and Bacteria
Graphics - Removes spraypowder, paper dust and fumes.
Woodworking - Use in drying rooms to remove solvent fumes.
|
| Key Features |
- Clean shop air up to 2,500 sq. ft.
- Floor level pick-up, circulates all the air
- Lightweight and mobile
- Operates on single phase 110V or 220V
- No assembly required
- Cleanable intake filters
- Meets OSHA and EPA requirements
- 5 Year warranty
|
| |
| Filters |
Dust Pads
- Vacuum pads lightly whilst in frame to remove accumulated dust
- Remove from frame and vacuum thoroughly (or blow off with compressed air)
- Replace in frame
- DO NOT WASH
|
Intake Filter
- Make sure DP Dust Pad is removed from front of filter
- Vacuum pleats horizontally and vertically(or blow off with compressed air)
- Replace DP Dust Pad
|
Carbon Filter
- CANNOT be cleaned. - remove and shake to turn carbon pellets
- REFILL when saturated - see refill instructions
|
| |
| Specifications |
| Electrical: |
1 HP, 1.0 – 10.5 Amp
110V or 220V Single Phase
Direct Drive Motor
Variable speed control |
| Blower Capacity: |
2000 CFM |
| Filter Monitor: |
Digital Readout |
| Construction: |
Molded polyethylene, Impact resistant |
| Weight: |
101 lbs (standard)
45.9 kg |
| Noise Level: |
0 to 72 db |
| Warranty: |
5 years parts, excluding filters |
|
| |
| |
