| Duster 3000 |
| |
Engineered to remove...
- Dust
- Odors
- Smoke
- VOC's
- Mists
- Spray Powder
- Toxic Fumes
- Pollen and Bacteria
|
| Key Features |
- Clean shop air up to 5,000 sq. ft.
- Floor level pick-up, circulates all the air
- Lightweight and mobile
- Operates on single phase 110V or 220V
- No assembly required
- Cleanable intake filters
- Meets OSHA and EPA requirements
- 5 Year warranty
|
| |
| Filters |
Dust Pads
- Vacuum pads lightly whilst in frame to remove accumulated dust
- Remove from frame and vacuum thoroughly (or blow off with compressed air)
- Replace in frame
- DO NOT WASH
|
Intake Filter
- Make sure DP Dust Pad is removed from front of filter
- Vacuum pleats horizontally and vertically(or blow off with compressed air)
- Replace DP Dust Pad
|
Carbon Filter
- CANNOT be cleaned. - remove and shake to turn carbon pellets
- REFILL when saturated - see refill instructions
|
MP85 Top Filter
- CANNOT be cleaned. - replace annually
|
AC24 Carbon Filter
- CANNOT be cleaned. - replace annually
|
| |
| Specifications |
| Electrical: |
1-1/3 HP, 110V or 220V Single Phase Explosion Proof, 12 Amp Motor.
Sealed controls, with a 50 foot (15m) heavy duty electrical cord. |
| Auto-Fire Shut-Off: |
Thermal protector inside unit. |
| Blower Capacity: |
3000 CFM |
| Construction: |
Double zinc coated sheet metal. Light gray color powder coat. |
| Weight: |
188 lbs (85 kg) |
| Noise Level: |
0 to 72 db |
| Warranty: |
5 years parts excluding filters |
|
| |
| |
