Offer more with production level LED printing

Designed to drive productivity, the two-meter EFI™ VUTEk® GS2000LX Pro LED printer gives you the ability to print on thinner and specialty substrates while lowering costs.

The EFI™ VUTEk® GS2000LX Pro is a fully loaded, production-level LED UV-curing hybrid printer with true grayscale technology that extends the range of supported substrates and print providers' bottom line with an innovative ink curing technology. It reduces operating costs with less material fall out and smooth production runs, and boosts productivity with its continuous print printing capability. No other technology in its class can deliver the environmental benefits to satisfy demands for a greener printing solution with less waste, fewer consumables and decreased power consumption.

Print on more substrates with a production-level LED printer

  • Delivers high definition point-of-purchase graphics with eight colors plus white and advanced multilayer white ink printing
  • Extends the range of supported substrates with innovative ink curing technology that delivers high quality and high adhesion
  • Increases up time and productivity, while decreasing maintenance costs
  • Reduces waste with consistent color output and simple operation
  • Satisfies customer requests for a greener print solution
  • Delivers higher image quality with true grayscale technology to extend your reach into more lucrative, higher-volume jobs at a lower total cost of ownership
  • Integrates seemlessly ready with EFI™ Web-to-Print and MIS/ERP solutions with native JDF connectivity
     
  • Eight colors plus white ink printing
  • Powerful LED curing technology
  • Orion operating system
  • Continuous print productivity with less than five seconds between boards for faster job turns
  • Single-pass multilayer printing
  • Standard multiqueue on-demand functionality
  • Precision alignment fence for accurate image alignment
  • Optional extension table with casters and small depth extension table
  • Optional Material Edge Guides (MEG) for working with imperfect corrugated materials.
  • Fiery® proServer with Fiery XF production digital front end and color management workflow
  • Bidirectional communication capability between the Fiery XF RIP and printer
  • Integrates seamlessly with EFI™ Web-to-Print and MIS/ERP solutions with native JDF connectivity
  • Enhanced Service Program (ESP) warranty for your printer, Fiery proServer hardware and Fiery XF software
Printing Technology
Print system
Media/Handling
Media/Handling
  • Handles rigid and sheeted media up to 80 in. (2 m) wide and up to 2 in. (5.08 cm) thick
  • Optional extension table with casters and small depth extension table
Productivity
Productivity
  • Fast-4™: 2,000 ft²/hr (186 m²/hr)
    • Production up to 45 – 4’x8’ (1.2m x 2.4m) boards per hour
  • Eight-color plus white: 1,000 ft²/hr (93 m²/hr)
    • Production up to 24 – 4’x8’ (1.2m x 2.4m) boards per hour
Environmental Considerations
Compressed Air100-150 psi maximum at 12 cf/m—dry air only (not included)
Temperature68° F to 86° F (20° C to 30° C)
Humidity40% to 80% (noncondensing)
DesignFully enclosed design for operator safety and environmental considerations
Electrical Specifications
Rated Voltage200–230 volt or 400-460 volt
Power Supply3-Phase, 30 amps or 60 amps
Dimensions and Weight
Width202” (513.08 cm)
Height66” (167.6 cm)
Depth

63" (160 cm) without tables; 163" (414 cm) with tables

  • + 5" (12.7 cm) unwinder
  • + 5" (12.7 cm) rewinder
Weight5,050 lbs. (2,291 kg)
Inks
Inks

Genuine EFI Inks

  • Supplied in 5.0-liter containers
  • Expanded gamut CMYK pigments for world-class pantone matching
  • EFI pigment dispersions ensure optimized size and concentration for best-in-class ink stability
Softwares
Software

EFI Fiery proServer

  • Optimized for use with the EFI Fiery proServer
  • Bidirectional communication capability between the Fiery
  • Fiery XF software and printer allows back communication of audit information on every print job
  • Powerful production tools such as nesting, step and repeat, scaling, cropping and tiling
  • Advanced ICC color management for reliable color, quality output and proofing-quality color
Service Program
Service Program

Enhanced Service Program (ESP)

  • EFI's industry-leading service and support program for your printer, Fiery proServer hardware and Fiery XF software
  • Thirteen months of Essential coverage, with 24-business-hour (three-business-day) response
  • Eligible for upgrade to:
  • Critical: Providing eight-business-hour (one-business-day) response
  • ProActive: Providing 16-business-hour (two-business-day) response
Others