Offer more with production level LED printing

Designed to drive productivity, the two-meter EFI™ VUTEk® GS2000LX Pro LED printer gives you the ability to print on thinner and specialty substrates while lowering costs.

The EFI™ VUTEk® GS2000LX Pro is a fully loaded, production-level LED UV-curing hybrid printer with true grayscale technology that extends the range of supported substrates and print providers’ bottom line with an innovative ink curing technology. It reduces operating costs with less material fall out and smooth production runs, and boosts productivity with its continuous print printing capability. No other technology in its class can deliver the environmental benefits to satisfy demands for a greener printing solution with less waste, fewer consumables and decreased power consumption.

Print on more substrates with a production-level LED printer

  • Delivers high definition point-of-purchase graphics with eight colors plus white and advanced multilayer white ink printing
  • Extends the range of supported substrates with innovative ink curing technology that delivers high quality and high adhesion
  • Increases up time and productivity, while decreasing maintenance costs
  • Reduces waste with consistent color output and simple operation
  • Satisfies customer requests for a greener print solution
  • Delivers higher image quality with true grayscale technology to extend your reach into more lucrative, higher-volume jobs at a lower total cost of ownership
  • Integrates seemlessly ready with EFI™ Web-to-Print and MIS/ERP solutions with native JDF connectivity
  • Eight colors plus white and Fast-5 printing
  • Resolutions of true 600 dpi or true 1000 dpi
  • White ink and multilayer print capability
  • LED technology for a greater range of supported substrates and greener printing
  • Fast changeover on flexible or rigid substrate printing
  • Production-level design for continuous shifts and 24-hour production capability
  • Continuous Print for up to 60 - 4'x8' (1.2 m x 2.4 m) boards per hour
  • Fiery proServer for increased productivity and efficiency while extending your color quality and proofing capability
  • Bi-directional communication between the Fiery® XF RIP and VUTEk system delivers audit information on every print job
  • EFI's world-class inks, service, support and end-to-end digital workflow
Printing Technology
Print system
Media/Handling
Media/HandlingHandles rigid and sheeted media up to 126.5 in. (3.2 m) wide and up to 2 in. (5.08 cm) thick Multi-roll capable (two 60” rolls) Optional Heavy-Duty Unwinder available for heavy roll-to-roll shops Optional Extension Table with casters to attach to printer or as a workstation Optional Small Depth Extension Table for use with small boards/ panels and multiple fence stops
Productivity
Productivity
  • Fast-5: 2,400 ft²/hr (223 m²/hr)
    • Production up to 60 – 4’x8’ (1.2m x 2.4m) boards per hour
  • Eight-color plus white: 1,200 ft²/hr (111 m²/hr)
    • Production up to 32 – 4’x8’ (1.2m x 2.4m) boards per hour
Environmental Considerations
Compressed Air100-150 psi maximum at 12 cf/m—dry air only (not included)
Temperature 68° F to 86° F (20° C to 30° C)
Humidity40% to 80% (noncondensing)
DesignFully enclosed design for operator safety and environmental considerations
Electrical Specifications
Rated Voltage200–230 volt OR 400-460 volt
Power Supply3-Phase, 30 amps OR 60 amp
Dimensions and Weight
Width248” (630 cm)
Height66” (167.6 cm)
Depth63” (160 cm) without tables
Weight6,700 lbs. (3,039 kg)
Inks
Inks

Genuine EFI Inks

  • Supplied in 5.0-liter containers
  • Expanded gamut CMYK pigments for world-class pantone matching
  • EFI pigment dispersions ensure optimized size and concentration for best-in-class ink stability
Softwares
Software

EFI Fiery proServer

  • Optimized for use with the EFI Fiery proServer
  • Bidirectional communication capability between the Fiery
  • Fiery XF software and printer allows back communication of audit information on every print job
  • Powerful production tools such as nesting, step and repeat, scaling, cropping and tiling
  • Advanced ICC color management for reliable color, quality output and proofing-quality color
Service Program
Service Program
  • EFI’s industry-leading service and support program for your printer, Fiery proServer hardware and Fiery XF software
  • Thirteen months of Essential coverage, with 24-business-hour (three-business-day) response
  • Eligible for upgrade to:
  • Critical: Providing eight-business-hour (one-business-day) response
  • ProActive: Providing 16-business-hour (two-business-day) response
Others